The majority of our residential loudspeakers have two sets of speaker terminals, one for the bass (LF) and one for the treble (HF). These are normally joined by links, and a single cable run is used to the amplifier. However by removing these links, and using two sets of cable or a special bi-wire cable, the LF and HF are only connected together at the amplifier. Even the best cables suffer from losses due to their electrical resistance, inductance and capacitance, and so bi-wiring avoids interaction between the LF and delicate HF parts of the signal. This gives better clarity, detail and an improved soundstage. Your Instruction Manual will detail how to prepare your loudspeakers for bi-wiring, and your dealer will be able to advise on suitable cable choices for a given budget. For further information, please refer to our white paper, which you can request by getting in touch with us.
Keywords: Bi-wiring Tannoy speakers: The how and the whys