- Be certain you have removed the film on the touch surface. The film can hold a charge causing buttons to randomly be triggered. There should also be nothing on the touch surface when the unit is started as the surface calibrates itself every time you start it.
- If you are using MIDI, filter incoming CC#. Select 'setup->midi->filter', and select sysex.
- Be certain you are not overloading the unit and have set the input gain. Adjust the input level control(side knob) while you sing so that the middle, orange LED lights on your loudest singing. The red LED should not light.
- Be certain Mic Control is turned off if you are not using it. To confirm this, select 'setup->input 1/13->input', and set this to dynamic.
Question: My VoiceLive Touch 2 randomly changes presets and parameters, what's wrong Answer: Here are a few things to check that can cause this type of issue to occur.
Keywords: VoiceLive Touch 2: Random changes of presets and parameters,VOICELIVE TOUCH 2