Question: How do I set my HyperGravity compressor to buffered or true bypass mode Answer: To set the bypass mode, proceed as follows: Disconnect the pedal and turn it on its back. Unscrew the back plate of the pedal and look for the two small dip-switches in the upper left corner. The upper DIP switch (the one closer to the power in jack), switches between True Bypass mode (default) and Buffered Bypass mode. Put the switch to the left for True Bypass, put it to the right for Buffered Bypass. Remount the back-plate. Please note: the second dip switch does not have any function
Keywords: HyperGravity: How do I change the bypass mode?