For sound engineers requiring high-level control capability, the iNUKE DSP amplifier range comes ready for action right out-of-the-box. The built-in DSP and 24-bit/96 kHz converters ensure the ultimate signal integrity with an extremely broad dynamic range. DSP functions include a sophisticated delay for delay-line loudspeakers, crossover, EQ (8 parametric, 2 dynamic), and dynamics processing with lockable security settings. A convenient front panel LCD display allows you to setup and make adjustments directly at the amplifier, without the need for a PC.
The process for saving your presets using the controls on the iNUKE amplifier is as follows: - Adjust your settings. - Once you have the right settings, press SETUP button. - Scroll down to 'Save Preset' using the SELECT encoder and push encoder. - Scroll to an empty bank and push SELECT encoder to save, - Name your preset using the SELECT encoder, To return the iNUKE DSP to factory settings: - Press SETUP button. - push SELECT encoder to 'Load Preset'. - Using the SELECT encoder scroll to any empty preset and push the encoder to load. - All settings will then be 'zeroed'. There will be no X-over, EQ etc.