Views:

 

 

 

 

 

 

 

 

1. The MASTER S16 would need to be the S16 being used on the "STAGE", so press the CONFIG button on the "STAGE" S16 and turn the SELECT/ADJUST encoder until the S/N MASTER green light comes on. This can be in either 44.1 or 48.

2. Connect the MASTER S16 to the "STAGE MIXER" S16 via AES50 A to AES50 A.

 

3. Press the CONFIG button on the "STAGE MIXER" S16 and turn the SELECT/ADJUST encoder until the screen displays "1-8".

 

4. Connect the "STAGE MIXER" S16 to the "MAIN HOUSE CONSOLE" S16 via AES50 B of the "STAGE MIXER" S16 to AES50 A of the "MAIN HOUSE CONSOLE" S16.

 

5. Press the CONFIG button on the "MAIN HOUSE CONSOLE" S16 and turn the SELECT/ADJUST encoder until the screen displays "1-8".

 

At this point, anything going into the MASTER S16 on the stage will come out of the 1-8 XLR outputs and ADAT 9-16 outputs of the "STAGE MIXER" S16 and the "MAIN HOUSE CONSOLE" S16.