The Lake Controller software provides a unified interface for the Lab.gruppen PLM, PLM+, LM, and D series. This video will go through the information available in Lake Controller's Technical Data window.The technical data window is displayed by tapping TECHNICAL DATA on the I/O CONFIG button bar.The Technical Data window includes hardware-based Frame data. This includes IP Address, Dual Redundancy, Front Panel Configuration and Dante settings.These settings are unaffected by SYSTEM RECALL, FRAME REPLACE, FRAME PRESET RECALL or FRAME CONFIGURATION and SOFT RESET options.If you are going to perform a Frame Replace on your device, you will need to make a note of the details in this window as they will not be saved.We need to power cycle the Frame to apply any changes we make to the parameters.Download the latest version of Lake Controller here: