The X32 application can be used to control the X-32 over a network. In order to achieve this, both the X32 and the computer you wish to control it with need to be connected to the same network. This can be achieved by either connecting them directly with an Ethernet cable, or by connecting them both to the same router.

On the device, press Setup and scroll right using the Page Select buttons until you see the ‘Network’ tab. Press the first encoder to turn on DHCP (this is highlighted orange when turned on – you do not need to press the encoder if this is already highlighted.)

In the X32 app, press ‘Setup’ in the top right corner of the screen, then the Connection menu should be open by default. Simply click ‘Rescan’ to find your device.