Views:

Clarity M - How can I connect to my UA Apollo interface?

Apollo 16 line - This has an AES/EBU out, this can be connected to the Clarity M Sub-D cable (included) using a NA2FBNC BNC>XLR adapter (not included) and setting the Clarity M Input parameter to AES mode.

Apollo x8 line - You can use the S/PDIF out to the Clarity M by using the included RCA>BNC adapter connected to the Sub-D cable and set the Clarity M Input parameter to Optical mode.

Apollo x6 - You can use the S/PDIF out to the Clarity M by using the included RCA>BNC adapter connected to the Sub-D cable and set the Clarity M Input parameter to Optical mode.

Apollo x4 - You can use the Optical S/PDIF mode on the Apollo x4 connected via an Optical cable direct to the Clarity M and set the Clarity M Input parameter to Optical mode.

Apollo 8P line - You can use the Optical S/PDIF mode on the Apollo x4 connected via an Optical cable direct to the Clarity M and set the Clarity M Input parameter to Optical mode.

Apollo Twin line - The Clarity M has only digital inputs, so in order to connect from the Twin you'd need another converter/interface from the Analog outputs to AES or S/PDIF, and then set the Clarity M Input parameter to either AES or Optical mode.

Arrow line - The Clarity M has only digital inputs, so in order to connect from the Twin you'd need another converter/interface from the Analog outputs to AES or S/PDIF, and then set the Clarity M Input parameter to either AES or Optical mode.