If you wish to connect the Perform VG to an Amplifier you will need to use the Guitar THRU but please note that using Guitar THRU will mute all guitar sounds in the Perform-VG.

Chords will still be detected for NaturalPlay harmony, but the intent is to connect to other pedals/amps instead of hearing guitar from Perform VG.

If you change the guitar level via the MIX button while the THRU is connected, the guitar signal will become available again via both THRU and MIC OUT, should you want a dry signal for guitar in addition to the mixed vocal/guitar output.

To re-mute the guitar in the MIC OUT, plug and re-plug the THRU or GUITAR IN.