Views:

MADI setup

Use the MADI page to monitor and configure MADI-related parameters.
These options are only available when the optional MADI card is installed.


MADI Preselect Channels section

The main function of this page is to allow you a pre-selection of 24 channels which are made available on the Routing page.
All of the incoming MADI channels can be routed to all of the 24 Router channels.


MADI Router Ch. Parameter

Use this parameter to select one of the 24 audio channels that are presented on the Routing page.


MADI In Channel Parameter

Use this parameter to select the incoming MADI channel that should be assigned to the respective Clarity X Routing channel. Depending on the incoming format and sample rate, you can make a selection from 28, 32, 56 or 64 channels.


MADI – Available Channels display

Available MADI channels are displayed here as follows:

1-56: 56 channel format 44.1 or 48 kHz MADI received
1-64: 64 channel format 44.1 or 48 kHz MADI received
1-28: 28 channel format 96 kHz MADI received
1-32: 32 channel format 96 kHz MADI received


No license available: 

No MADI license installed. Contact TC Electronic support for license purchase.
The Clarity X MADI hardware is installed.



No card installed:

No MADI hardware card installed. Contact TC Electronic support for an upgrade.


MADI – Available Channels LED Input state is displayed as follows:

Red: no input
Yellow: slip/repeats
Green: signal in sync
“N/A” and red LED: no MADI input