Views:

Please follow these instructions to set up your Behringer X Air series mixer with a secure network without connecting the unit to your computer.

Connecting to the X Air Mixer:
Write down the network name, password, and security protocol (WEP, WPA, or WPA2) of your existing secure network.
Set the switch on the X Air Mixer to Access Point and power it on.
Select the X Air Mixer as your network in WiFi Settings of your mobile device.
Launch the X-Air App and select the X Air Mixer when it appears next to the IP address box.


Sending new network info to the X Air Mixer:
Press Setup at the top of the screen in the X-Air app and then press Network
Enter the name and password for your new network in the designated sections.
Select WEP, WPA, or WPA2, press Apply on the left of the Network window, and quit the X=Air app.


Switching to the new Network:
Select your secure network in the Wifi settings of your mobile device and then turn off the X Air mixer.
Set the switch on the X Air Mixer to WiFi Client, then power on and launch the X-Air app.
Select the X Air Mixer when it appears next to the IP Address box.