Views:

The Deepmind Global menus allow you to calibrate various aspects of the Deepmind. To enter this menu, press GLOBAL until you reach the SYSTEM SETTINGS. Use the BANK/DOWN button until you reach CALIBRATE and press YES.

In the CALIBRATION menu, scroll down to CAL MOD WHEEL and press YES. The steps below run through the calibration:

  1. Move the MOD WHEEL to its minimum position.
  2. Make sure that the '<' symbol on the CAL MOD WHEEL line is highlighted and press +/YES.
  3. You will see a bar representing the MOD WHEEL value. Move the wheel to the max position.
  4. Press YES once completer to store the calibration data.