Views:

The X-TOUCH supports MC, HUI, and XCTL protocols. To set your X-TOUCH to the correct mode, access the Configuration Menu:

  1. While pressing and holding down the Channel 1 SELECT button, power on the device. This will bring up the Configuration Menu.
  2. Rotate encoder 1 to change the emulation mode between MC, HUI, and XCTL modes.
  3. Rotate encoder 2 to select how you've interfaced the device: USB, MIDI, or Network.
  4. Encoders 3-7 will pertain to Network settings. Encoder 8 adjusts display contrast.
  5. After you've set your parameters, press the Channel 1 SELECT button to save and start the selected emulation.

The X-TOUCH EXTENDER supports MC and HUI protocols. To set your X-TOUCH EXTENDER to the correct mode, access the Configuration Menu:

  1. While pressing and holding down the Channel 1 SELECT button, power on the device. This will bring up the Configuration Menu.
  2. Rotate encoder 1 to change the emulation mode between MC, HUI, and XCTL modes.
  3. Rotate encoder 2 to select how you've interfaced the device: USB, MIDI, or Network.
  4. Encoders 3-7 will pertain to Network settings. Encoder 8 adjusts display contrast.
  5. After you've set your parameters, press the Channel 1 SELECT button to save and start the selected emulation.


The X-TOUCH COMPACT supports a standard operating mode and MC protocol. To set your X-TOUCH COMPACT to the correct mode:

  1. While pressing and holding down the MC button in the bottom left corner, power on the device. Hold down the MC button until the MC MODE LED lights continuously. This will indicate that you are now in MC Mode.
  2. Repeat this process to switch back to standard mode.
  3. The device will stay in the set mode through power cycles until it is changed.


The X-TOUCH ONE supports MC, HUI, and MIDI protocols. To set your X-TOUCH ONE to the correct mode:

  1. While pressing and holding down the encoder knob, power on the device. If your device is already on, press and hold the large STOP transport button and then press the encoder knob to enter Setup mode.
  2. Rotate the encoder knob until your mode is selected in the LCD display. Press the encoder knob again to set your mode. 
  3. The following parameters will be for contrast settings. After setting these parameters, press the encoder a final time to save your settings and enter the selected emulation.


The X-TOUCH MINI supports a standard operating mode and MC protocol. To set your X-TOUCH MINI to the correct mode:

  1. While pressing and holding down the MC button in the bottom left corner, power on the device by plugging in the USB cable to a live computer. Hold down the MC button until the MC MODE LED lights continuously. This will indicate that you are now in MC Mode.
  2. Repeat this process to switch back to standard mode.
  3. The device will stay in the set mode through power cycles until it is changed.


For more information on the operation of your device, please find the device Quick Start Guide on the product page on https://www.behringer.com/