Views:

Integrating an AFR with a 12V trigger to turn a C and CX series Lab Gruppen amp on and off using an NLB 60  

Press enter [ with OK button ] 

Use select to scroll to config 

Press enter 

Use select to scroll to GPI one 

Press enter 

On low to high screen use adjust/set buttons to show PWR ON 

Press enter 

On next screen [ high to low ] use adjust/set buttons to PWR OFF 

Press enter 

That’s it. On the rear apply DC voltage above 10V and up to 24V to the  

24V sens input on the rear of the NLB 60