Views:

TURBOSOUND iNSPIRE and iX factory reset procedure.

Applicable products: • iP3000. iP2000, iP1000, iP500, iP300 iP15B, iP12B • iX15, iX12 (includes V1 and V2 models)

 

Use this procedure if you are locked out of the speaker DSP due to forgetting the password.

 

Step 1.) Press and hold down the encoder knob and the SETUP button while powering on the unit.

 

Step 2.) The display screen should now be fl ashing white and blue.

Step 3.) Press the encoder knob twice.

Step 4.) You should now see the following screen:

 

Step 5.) Click the 4 buttons: PROCESS -> SETUP -> EXIT -> ENTER

Step 6.) You should now see the following screen:

 

Step 7.) Press the encoder knob once.

Step 8.) You should now see the following screen:

 

Step 9.) Move the encoder knob clockwise and press down once again to complete the factory reset.

 

This concludes the factory reset procedure for Turbosound iP and iX loudspeakers.