TC 2290: How to build a footcontroller to control the loops
Question How do I build an external footcontroller to control my loops
You can find a PDF file of the schematic, showing how to build a pedal yourself, below. The four buttons on the remote control can on the TC2290 be programmed to do different tasks. The default settings are: Key1: Delay ON/OFF toggle Key2: Last preset Key3: Preset up Key4: Preset down The fifth button "Learn/Trig" can 'only' have the same function as the Learn button on the frontpanel and thus be used for tapping delay time. You will find information regarding programming the assign / remote keys in chapter 9.5 in your TC2290 owners manual. An example of how to make the remote key 2 to toggle loop 1 on/off: Press : Remote key 2 string begin Press : keycode for button Press : 2nd Remote key 2 string location Press : keycode for button Press : 3rd Remote key 2 string location Press : code for end assign string. Please note that this is a global parameter and the remote keys will have these functions in all presets. Programming of assign keys (KeyA and KeyB) will be effective in all presets except sampling presets. You can also store the settings of your loops in the presets. I.e. one preset with a delay on xxmS and loop1:ON, loop2:OFF etc. Another preset with a chorus settings and loop1:OFF, loop2:ON etc. etc.
Keywords: TC 2290: How to build a footcontroller to control the loops