Views:
                  The following will allow you to operate the SF400 Super Flanger to its full potential:1.  Connect a guitar to the input jack of the SF400 using a 1/4" instrument cable.2.  Connect an amp to the output A jack of the SF400 using a 1/4" instrument cable.3.  OPTIONAL:  Connect a secondary amp to the output B jack of the SF400 using a 1/4" instrument cable for a stereo effect.4.  OPTIONAL:  Connect an expression pedal to the EXP/CTL jack of the SF400 using a 1/4" TRS cable.5.  Use the MANUAL control to adjust the center frequency to which the effect is applied.6.  Use the DEPTH control to achieve a fuller and deeper effect sound.7.  Use the RATE control to adjust the speed of the effect.8.  Use the MODE control to select one of four different effect modes:
  • Standard - classic flanger
  • Ultra - strong flanger with more depth
  • Gate/Pan - mono slicer or swirling stereo flanger, depending on mono or stereo use.
  • Momentary - Momentary flanger.  Keep the pedal depressed for effect activiation
As always, experiment with the controls until the desired effect is achieved.