To update the console there are two options:
1. go to SETUP, touch the EDIT symbol in the GLOBAL section, then activate the OS ACCESS. Connect the console to a computer using the rear USB port. The console will appear as a harddrive (WING_OS). Copy the new firmware to this drive (the console will boot the newest firmware, you can remove olderversions to save space). In case you want to go back to older versions just remove the newer files.
2. switch off the console, then press and hold the SELECT(now blank) button on the main display bezel and switch on the console. The console will not start up (screen stays dark). Connect the console to a computer using the rear USB port. The console will appear as two harddrive partitions (WING_OS and WING_DATA). Follow (1) for the update.
Please eject the drive properly on your computer (to avoid data loss), then restart (power cycle) the console. It will boot up with the new firmware. In case there are updates to the fader boards, this will take place automatically after boot. Wait until all surface elements are operational.